HP Designjet T Series — Service Manual 6-61
Removal and Installation - Service Station (T1100/T1100ps/T610)
Service Station (T1100/T1100ps/T610)
Removal
1. Remove the Right Cover on page 6-27.
2. Disconnect the two lower connectors from
the PrintMech PCA.
3. Unroute the two cables disconnected in
step 2 from the two cable clamps below
the PrintMech PCA.
4. Remove the grounding cable attachment
screw from the PrintMech PCA.
Switch off the printer and remove the power cable.
44 inch T1100 printer shown (with Rewinder)
44 inch T1100 printer shown (with Rewinder)
44 inch T1100 printer shown (with Rewinder)