Filter
Top Products
3. If the media is too long, lift the latch on the front of the tray and lower the front of
the tray.
4. Insert the media print-side down along the right of the main tray. Make sure the
stack of media aligns with the right and back edges of the tray, and does not
exceed the line marking in the tray.
NOTE: Do not load media while the printer is printing.
5. Slide the media guides in the tray to adjust them for the media size that you have
loaded.
6. Lower the output tray.
7. Pull out the tray extender.
Maintain the printer
This section provides instructions for keeping the printer in top working condition.
Perform this maintenance procedure as necessary.
•
Clean the exterior
Clean the exterior
WARNING! Before cleaning the printer, turn off the power and unplug the power
cord from the electrical socket.
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the case.
Keep fluids away from the interior of the printer, as well as from the printer control
panel.
Maintain the printer 17