b. Hold the delivery assembly with the diverter (callout 1) in the depressed position to move the
sensor flag (callout 2) away from the sensor. Release one tab (callout 3).
Figure 2-122 Reinstall the delivery assembly (3 of 4)
2
3
1
c. Slide the sensor up toward the top of the delivery assembly to release two hooks (callout 1),
and then carefully remove the sensor from the assembly.
CAUTION: Do not damage the sensor holder or sensor flag when removing the sensor from
the delivery assembly.
Figure 2-123 Reinstall the delivery assembly (4 of 4)
1
150 Chapter 2 Removal and replacement ENWW