Filter
Top Products
Item Description Item Description
X SR7 (PDU) Tray 4 feed
sensor
F SR6 Delivery tray media full
sensor
b SR10 (PDU) Tray 5 feed
sensor
X-1 Registration stop position
A SR20 Top-of-Page sensor
(TOP)
X-2 Duplex media waiting position
1 (duplex models only)
B, C SR14/15 Loop sensors 1/2 X-3 Duplex media waiting position
2 (duplex models only)
D SR5 Fuser delivery sensor
Table 3-15 Common causes of jams (by area)
Jam code Jammed media position
13.01.00
●
Leading edge of media fed from Tray 3 is stopped before T
●
Leading edge of media fed from Tray 4 is stopped before X
●
Leading edge of media fed from Tray 5 is stopped before b
13.30.00
●
Leading edge of media fed from Tray 1 is stopped before A
●
Leading edge of media fed from Tray 2 is stopped before A
●
Leading edge of media fed from Tray 3 is stopped before A
●
Leading edge of media fed from Tray 4 is stopped before A
●
Leading edge of media fed from Tray 5 is stopped before A
13.03.00
●
Leading edge of media fed from Tray 4 is stopped before T
●
Leading edge of media fed from Tray 5 is stopped before T
13.02.00
●
Media stays at A
13.04.00
●
Media stays at T
13.05.00
●
Leading edge of media is stopped between A and D
13.06.00
●
Media stays at D
13.08.00
●
Media fed from Tray 4 stays at X
●
Media fed from Tray 5 stays at b
13.12.00
●
Duplex refeed media is stopped between D and E
13.13.00
●
Duplex refeed media is stopped between E and A
13.20.00
●
At power on with door closed, media stays at D
●
At auto-flushing, media stays at T, X, b, A, B/C, D, or E
13.21.00
●
Media jammed at any position
13.1C.00
●
Media fuser wrap
ENWW Clear paper jams 385