Tray 3, 4, and 5 right door switch
NOTE: There is no manual sensor test for this sensor.
1. Open the paper feeder right door. Check the control-panel display for the CLOSE LOWER RIGHT
DOOR message. If the message does not display, open the door and inspect the flag for damage
(callout 1).
2. Insert a piece of paper to activate the sensor. If there is no response, replace the switch.
NOTE: Make sure that the door flag (callout 1) is not damaged or missing.
Figure 3-26 Test the right door switch
1
272 Chapter 3 Solve problems ENWW