Filter
Top Products
Change jam recovery
This product provides a jam recovery feature that reprints jammed pages. The following options are
available:
●
AUTO — The product attempts to reprint jammed pages when enough memory is available. This
is the default setting.
●
OFF — The product does not try to reprint jammed pages. Because no memory is used to store
the most recent pages, performance is optimal.
NOTE: When using this option, if the product runs out of paper and the job is being printed on
both sides, some pages can be lost.
●
ON — The product always reprints jammed pages. Additional memory is allocated to store the last
few pages printed. This might cause overall performance to suffer.
Set the jam recovery feature
1. Press the Home button
.
2. Press the down arrow
to highlight the CONFIGURE DEVICE menu, and then press the OK
button.
3. Press the down arrow
to highlight the SYSTEM SETUP menu, and then press the OK button.
4. Press the down arrow
to highlight the JAM RECOVERY menu, and then press the OK button.
5. Press the down arrow or up arrow
/ to highlight the appropriate setting, and then press the
OK button.
6. Press the Home button
to return to the Ready state.
402 Chapter 3 Solve problems ENWW