Filter
Top Products
Description Recommended action
CYAN CARTRIDGE VERY LOW The product indicates when a supply level is
very low. Actual print cartridge life might vary.
Consider having a replacement print
cartridge available to install when print quality
is no longer acceptable. You do not need to
replace the print cartridge at this time unless
print quality is no longer acceptable. After an
HP supply has reached the very low
threshold, the HP premium protection
warranty for that supply has ended.
If print quality is no longer acceptable, replace
the print cartridge. See
Print cartridges
on page 74.
CYAN CARTRIDGE VERY LOW
To continue press OK
The product indicates when a supply level is
very low. Actual print cartridge life might vary.
Consider having a replacement print
cartridge available to install when print quality
is no longer acceptable. You do not need to
replace the print cartridge at this time unless
print quality is no longer acceptable. After an
HP supply has reached the very low
threshold, the HP premium protection
warranty for that supply has ended.
Press the OK button to continue. If print
quality is no longer acceptable, replace the
print cartridge. See
Print cartridges
on page 74.
DATA RECEIVED
To print last page press OK
The product is waiting for the command to
print the last page.
Press the OK button to print the last page.
DATE/TIME = YYYY/MMMM/DD HH:MM
To change press OK
To skip press
The current date and time set for the product. Press the OK button to set the date and time
or press the stop button
to skip setup.
Deleting private jobs The product is deleting a private stored job. No action is necessary.
Deleting... The product is currently deleting the stored
job.
No action is necessary.
EIO <X> DISK INITIALIZING The specified EIO disk device is initializing. No action is necessary.
EIO <X> DISK NOT FUNCTIONAL The EIO disk in slot <X> is not working
correctly.
1. Turn the product off.
2. Remove the disk from the slot indicated.
3. Replace with a new disk.
4. Turn the product on.
EIO <X> DISK SPINNING UP EIO disk device in slot <X> is spinning up its
platter. Jobs that require disk access must
wait.
No action is necessary.
EIO DEVICE FAILURE
To clear press OK
The specified device has failed. Press the OK button to clear.
EIO FILE OPERATION FAILED
To clear press OK
A PJL file system command attempted to
perform an illogical operation.
Press the OK button to clear.
EIO FILE SYSTEM IS FULL
To clear press OK
A PJL file system command could not store
something on the file system because the file
system was full.
Press the OK button to clear.
Table 3-14 Control-panel messages (continued)
360 Chapter 3 Solve problems ENWW