3. Remove five screws (callout 1), and then remove the cover (callout 2).
CAUTION: Be careful. The PGC actuators are easily dislodged when the cover is removed. See
Figure 2-185 Reinstall the PGC actuators (1 of 5) on page 193. To reinstall the actuators, see
Reinstall the protective glass cleaner (PGC) actuators on page 193.
Figure 2-182 Remove the laser/scanner assembly (C/Bk) (3 of 5)
2
1
4. Release one spring.
CAUTION: The spring is not captive. Do not lose the spring when it is removed. Use a pair of
needle-nose pliers to safely retain the spring when it is removed. Do not use a flat blade screwdriver
to remove the spring; the spring could forcibly leave the product and strike you.
Reinstallation tip When you reinstall the spring, make sure that the laser/scanner fits tightly up
against the product chassis.
Figure 2-183 Remove the laser/scanner assembly (C/Bk) (4 of 5)
192 Chapter 2 Removal and replacement ENWW