Filter
Top Products
Use manual print modes
Try the following multi-purpose (MP) modes to see if they solve the image-quality problems. These
options can be found in the ADJUST PAPER TYPES and OPTIMIZE submenus under the PRINT
QUALITY menu on the control panel.
Table 3-30 MP modes under the ADJUST PAPER TYPES sub menu
PRINT MODE
●
AUTOSENSE MODE
●
NORMAL MODE
●
LIGHT MODE
●
LIGHT ROUGH MODE
●
HEAVY MODE
●
EXTRA HEAVY MODE
●
CARDSTOCK MODE
●
HEAVYGLOSSY MODE
●
X-HVYGLOSSY MODE
●
CARD GLOSSY MODE
●
ROUGH MODE
●
TRANSPARENCY MODE
●
4MM TRNS MODE
●
TRANSPARENCY2 MODE
●
TOUGH MODE
●
LABEL MODE
●
ENVELOPE MODE
NOTE: Not all print modes are available for all paper types.
RESISTANCE MODE Set to UP to resolve print-quality issues caused by poor
secondary transfer in low-humidity environments with resistive
or rough surface media.
HUMIDITY MODE With glossy film, set to HIGH when the product is in a high-
humidity environment and print-quality defects occur on HP
Tough Paper or Opaque film.
With transparencies, set to HIGH when the product is in a high-
humidity environment and print-quality defects occur on color
transparencies on the first page of a print job.
With all other paper types, set to HIGH when the product is in
a high-humidity environment and light density occurs on the
first page of a print job.
PRE-ROTATION MODE Set this feature to ON if horizontal banding occurs on pages.
408 Chapter 3 Solve problems ENWW