Filter
Top Products
156 User Guide Integrated Lights-Out
6. Download the Smart Component, which contains the installers for the
schema extender and the snap-ins. The Smart Component can be downloaded
from the HP website (http://www.hp.com/servers/lights-out
).
7. Run the schema installer application to extend the schema, which extends the
directory schema with the proper HP objects.
The schema installer associates the Active Directory snap-ins with the new
schema. The snap-in installation setup utility is a Windows® MSI setup
script and will run anywhere MSI is supported (Windows® XP, Windows®
2000, Windows® 98). However, some parts of the schema extension
application require the .NET Framework, which can be downloaded from the
Microsoft® website (http://www.microsoft.com
).
Snap-In Installation and Initialization for Active Directory
1. Run the snap-in installation application to install the snap-ins.
2. Configure the directory service to have the appropriate objects and
relationships for iLO management.
a. Use the management snap-ins from HP to create iLO, Policy, Admin,
and User Role objects.
b. Use the management snap-ins from HP to build associations between the
iLO object, the policy object, and the role object.
c. Point the iLO object to the Admin and User role objects (Admin and
User roles will automatically point back to the iLO object).
For more information on iLO objects, refer to "Directory Services Objects
(on page 162
)."
At a minimum, you must create:
•
•
One Role object that will contain one or more users and one or more iLO
objects.
One iLO object corresponding to each iLO management processor that will
be using the directory.