Filter
Top Products
Using iLO 77
To create a Virtual Media image file:
1. Click Create Disk Image.
2. Select the drive letter and the image file name. You can use the Browse
feature to find and select an existing image file or to change the directory in
which the image file will be created.
3. Click Create. The Virtual Media applet begins the process of creating the
image file. The process is complete when the progress bar reaches 100
percent.
The Disk>Image option is used to create image files from physical CD-ROMs.
The Image>Disk option is not valid for a Virtual CD-ROM image.
Virtual Media Composite Device Support
Composite device support allows both the Virtual Media Floppy Drive and the
CD-ROM device to be connected to the host simultaneously. The drive selected
can be either a physical drive or an image file or any combination of the two
devices. Composite USB devices are only supported on Microsoft® Windows®
2000 with Service Pack 3 and Windows® 2003.
To configure composite mode:
1. Click Configure. The Configure Virtual Device window appears.
2. Select either:
− Single Device for using either the Virtual Media Floppy or CD-ROM
− Composite Device for using the Virtual Media Floppy and CD-ROM
simultaneously