Filter
Top Products
Troubleshooting iLO 365
LED Indicators POST Code
(Activity
Completed)
Description Failure Indicates
4 08 Copy secondary loader to
RAM.
Could not copy secondary
loader.
4 and 1 09 Verify secondary loader. Did not execute
secondary loader.
4 and 2 0a Begin secondary loader. SDRAM memory test
failed.
4, 2, and 1 0b Copy ROM to RAM. Could not copy boot
block.
4 and 3 0c Verify ROM image in RAM. Boot block failed to
execute.
4, 3, and 1 0d Boot Block Main started. Boot block could not find a
valid image.
None
Start C Run time
initialization.
4, 3, and 2 0e Main() has received
control.
Main self-test failed.
Varies Varies Each subsystem may self-
test.
4, 3, 2, and 1 0f Start ThreadX. RTOS startup failed.
None 00 Main_init() completed. Subsystem startup failed.
HB and 7
Flashes as the iLO
processor executes
firmware code. It does not
change the value of the
lower six LEDs.
The iLO microprocessor firmware includes code that makes consistency checks.
If any of these checks fail, the microprocessor executes the FEH. The FEH
presents information using the iLO POST LED indicators. The FEH codes are
distinguished by the alternating flashing pattern of the number 99 plus the
remainder of the error code.