Filter
Top Products
238 User Guide Integrated Lights-Out
d. You may need to edit the SNMP monitor community string (for
example, by changing it to "public") so that iLO is displayed in the list of
monitored devices. The SNMP read community string can be changed by
accessing the Systems Protocol Settings page. Click Options>Protocol
Settings>System Protocol Settings.
Another option is to click Options>Protocol Settings>Global Protocol
Settings and set community strings to use during discovery under
Default SNMP Settings. When set, you can use steps a through c to run
Discovery again.
For major, uncleared events, iLO traps are displayed in All Events. You can
also use the orange button at the top of the screen to obtain the major
uncleared events. Click the Event Type to obtain further information about
the event.
NOTE: HP Insight Agents for iLO must be installed on the remote host
server to enable management of iLO. Refer to "Installing iLO Device
Drivers (on page 24
)" for additional details about installing and
configuring agents.
System Insight Manager Port Matching
Systems Insight Manager is configured to start an HTTP session to check for iLO
at port 80. The port can be changed. If you want to change the port number, you
must also change it in Network Settings and Systems Insight Manager.
To change the port number in Systems Insight Manager, add the port to the
config\identification\additionalWsDisc.props file in the directory where Systems
Insight Manager is installed. The entry must start with the HTTP port for iLO.
No entry needs to be in this file for iLO if it remains at the standard Port 80. It is
very important that the entry is on a single line and the port number is first, with
all other items identical to the following example (including capitalization).
The following example shows what the entry is if iLO is to be discovered at port
55000 (this should all be on one line in the file):
55000=iLO, ,true,false,com.hp.mx.core.tools.identificati
on.mgmtproc.MgmtProcessorParser