Filter
Top Products
76 User Guide Integrated Lights-Out
3. Insert the media into the client's CD-ROM drive, select a drive, and click
Connect.
4. The NetWare 6.5 operating system will automatically detect the new Virtual
CD-ROM drive, mount it as an NSS volume, and display it as the media's
volume label name. A volume label name will only appear in the NetWare
6.5 operating system if media is present in the Virtual Media CD-ROM
drive. To show the mount status of the new drive, use the volumes
command through the server console.
The virtual CD-ROM can also be mounted as a normal CD-ROM device
using the LOAD CDDVD command.
When the drive letter shows as mounted, the drive will be accessible through the
server's GUI and the system console.
Mounting USB Virtual Media CD-ROM in Linux
1. Access iLO through a browser.
2. Select Virtual Media in the Virtual Devices tab.
3. Select a CD-ROM to be used and click Connect.
4. Load the USB drivers using the following commands:
modprobe usbcore
modprobe usb-storage
modprobe usb-ohci
5. Load the SCSI CD-ROM disk driver using the following command:
modprobe sr_mod
6. Mount the drive using the following command:
mount /dev/scd0 /mnt/cdrom –t iso9660
NOTE: Use the man mount command for additional file system types.
Creating an iLO Virtual CD-ROM Image
The iLO Virtual Media feature enables you to create CD-ROM image files
within the same applet. The image files created from the applet will be ISO-9660
file system images. The performance of iLO Virtual CD-ROM is faster when
image files are used.