Filter
Top Products
Troubleshooting iLO 369
Event Log Display Event Log Explanation
Security Override Switch Setting
Changed to Off
Displays when the system is booted with the
Security Override Switch changed from On to Off.
Displays when the on-board clock is set. Will
display the previous time or "NOT SET" if there
was not a time setting previously.
Logs full SNMP trap alert failed for: IP address Displays when the logs are full and the SNMP trap
alert failed for a specified IP address.
Security disabled SNMP trap alert failed for:
IP address
Displays when the security has been disabled and
the SNMP trap alert failed for a specified IP
address.
Security enabled SNMP trap alert failed for: IP
address
Displays when the security has been enabled and
the SNMP trap alert failed for a specified IP
address.
Virtual Floppy connected by User Displays when an authorized user connects the
Virtual Floppy.
Virtual Floppy disconnected by User Displays when an authorized user disconnects the
Virtual Floppy.
License added by: User Displays when an authorized user adds a license.
License removed by: User Displays when an authorized user removes a
license.
License activation error by: User Displays when there is an error activating the
license.
iLO RBSU user login: User Displays when an authorized user logs in to
iLO RBSU.
Power on request received by: Type A power request was received as one of the
following types:
Power Button
Wake On LAN
Automatic Power On
Virtual NMI selected by: User Displays when an authorized user selects the
Virtual NMI button.
Virtual Serial Port session started by: User Displays when a Virtual Serial Port session is
started.
Virtual Serial Port session stopped by: User Displays when a Virtual Serial Port session is
ended.
On-board clock set; was previously
[NOT SET]"