Filter
Top Products
Using iLO 73
3. Click Connect.
Using an Image File
1. Select Local Image File within the Virtual CD-ROM section of the Virtual
Media applet.
2. Enter the name of the CD-ROM image in the text box. You can also click
Browse to locate image files.
3. Click Connect.
When connected, virtual devices are available to the host server until you close
the Virtual Media applet. When you are finished using the Virtual CD-ROM, you
can choose to disconnect the device from the host server or close the applet. The
Virtual Media applet must remain open when using a Virtual Media Device.
iLO Virtual Media CD-ROM will be available to the host server at run time if the
operating system on the host server supports USB floppy drives. Refer to
"Operating System USB Support (on page 65
)" for information on which
operating systems support USB mass storage at the time of the publication of this
manual.