Filter
Top Products
iLO Parameters 347
SNMP/Insight Manager Settings Parameters
iLO supports SNMP settings on a device level. These parameters are not
designated on a per-user basis but are specific to iLO.
SNMP Alert Destinations
Enter the IP address of the remote management PC that will receive SNMP trap
alerts from iLO. Up to three IP addresses can be designated to receive SNMP
alerts.
Enable iLO SNMP Alerts
iLO alert conditions are detected by iLO and are independent of the host server
operating system. These alerts can be Insight Manager SNMP traps. These alerts
include major events, such as remote server power outages or server resets. They
also include iLO events, such as security disabled or failed login attempt. iLO
forwards the alerts to an Insight Manager 7 or Systems Insight Manager console
using the destinations provided. The default setting is No.
Forward Insight Manager Agent SNMP Alerts
These alerts are generated by the Insight Management agents, which are provided
for each supported network operating system. The agents must be installed on the
host server to receive these alerts. These alerts are sent to Insight Manager 7 or
Systems Insight Manager clients on the network and are forwarded
asynchronously by iLO to the IP addresses that have been configured to receive
them. The default setting is Yes.
Enable SNMP Pass-Through
The Enable SNMP pass-through option enables the system to pass SNMP
packets from the Insight Management Agent. When set to No, all SNMP traffic is
stopped and will not pass-through iLO. The default setting is Yes.