Filter
Top Products
26 User Guide Integrated Lights-Out
To install the drivers in the PSP, download the PSP from the HP website
(http://www.hp.com/support
), run the SETUP.EXE file included in the
download, and follow the installation instructions. For additional information
about the PSP installation, read the text file included in the PSP download.
Novell NetWare Server Driver Support
The device drivers required to support iLO are part of the PSP that is located on
the SmartStart CD and the HP website (http://www.hp.com/support
).
iLO Pre-Requisite Files for NetWare
The CPQHLTH.NLM file provides the Health Driver for NetWare.
The CPQCI.NLM file provides the iLO Management Interface Driver support.
Installing or Updating iLO Drivers for NetWare
The PSP for Novell NetWare includes an installer that analyzes system
requirements and installs all drivers. The PSP is available on the HP website
(http://www.hp.com/support
) and on the SmartStart CD.
When updating iLO drivers, be sure iLO is running the latest version of the iLO
firmware. The latest version can be obtained as a Smart Component from the HP
website (http://www.hp.com/servers/lights-out
).
To install the drivers, download the PSP from the HP website
(http://www.hp.com/support
) to a NetWare server. After the PSP has been
downloaded, follow the NetWare component installation instructions to complete
the installation. For additional information about the PSP installation, read the
text file included in the PSP download.
When using NetWare 6.X, a RAGE-XL video driver is provided by the operating
system and should be used for best results.