Cancel a scan in progress
To cancel a scan during processing, or to cancel a series of scans when the ADF is
being used, either:
● Use the Cancel button (
).
● Click the Cancel button on the progress dialog box that is displayed during the
scan.
Change scan settings
You can change settings for the scanner buttons by pressing the Button Settings
button (
).
1. Press the Button Settings button.
The Front Panel Scan Button Settings dialog box is displayed.
2. Click the appropriate tab, and change the settings.
3. When finished with the changes, click OK.
You can change many scan settings from the Settings menu in the HP Solution
Center, including:
● Button settings for the scanner front panel
● Settings for HP Solution Center scan buttons
● Scan preferences, such as automatic exposure
Use the Power Save button
Press the Power Save button ( ) once briefly to turn off the lamp when not using the
scanner. When you are ready to begin scanning again, just press one of the front
panel scan buttons to turn the lamp back on and begin scanning immediately.
To turn the scanner completely off, press and hold the Power Save button (
) for two
(2) seconds.
To begin scanning again once you have turned the scanner completely off, press the
Power Save button once only.
Chapter 1
10
HP Scanjet 8270 Document Flatbed Scanner