Filter
Top Products
If you find it necessary to remove the cassette supporter from the
printer, use the following procedure (referring to the illustrations in the
previous section, if necessary):
1 Turn off the printer, and disconnect the power cord and all
interface cables.
2 Remove the paper cassettes from the printer.
3 Remove the paper feeder from the printer.
Follow the steps in the “Removing the Paper Feeder” section ear-
lier in this chapter.
4 Remove the cassette supporter from the paper feeder.
Follow, in reverse order, the steps in the “Installing the Cassette
Supporter” section of this chapter. The following is a quick over-
view of the procedure:
a Pull the lock buttons on the cassette supporter that lock it to
the paper feeder.
b Take the paper feeder off the cassette supporter.
c Push the lock buttons in on the cassette supporter.
d Reconnect the interface cables and power cord.
e Turn on the printer.
Once you have installed a paper feeder and a cassette supporter, you
can use a 500-sheet paper cassette to increase your printer’s total
paper-feed capacity to 850 sheets.
» Note:
500-sheet cassettes support only letter/A4-size media.
To ensure that all 500 sheets fit in the cassette and that the paper stack
is properly leveled out, use the following procedure to load the 500-
sheet paper cassette: