Filter
Top Products
The Energy Saver option specifies whether the printer changes to a
low-power state (the engine remains on, but the fuser turns off) after a
specified period of inactivity. When a print job is received, the printer
begins processing it in the background and returns to normal power
within 90 seconds.
The Administration/Startup Options menu allows you to configure
your printer to run certain options automatically when you turn it on.
By default, the printer prints a start-up page when you turn it on. The
start-up page lists basic information about the printer, such as its
name, the PostScript emulation level and version, and various printer
settings. However, you can turn the start-up page off to conserve
paper and toner.
Menu Administration/Engine/Energy Saver
Choices 15 Min—Use lower power after 15 minutes of inactivity.
30 Min—Use lower power after 30 minutes of inactivity.
1 Hour—Use lower power after 1 hour of inactivity.
2 Hours—Use lower power after 2 hours of inactivity.
3 Hours—Use lower power after 3 hours of inactivity.
Off—Use normal power all of the time.
Default 1 Hour
Menu Administration/Startup Options/Do Start Page
Choices Yes—Print a start-up page each time the printer is turned on.
No—Don’t print a start-up page each time the printer is turned
on.
Default Yes