Filter
Top Products
3 Depending on the type of card you are installing, either turn
on the printer again or press the Online/Offline key to put the
printer back on line.
The fonts are now ready to be used.
» Note:
If you’re using a font card, you should also make sure that
the printer driver you have installed for each application supports
the fonts on the card. If it doesn’t, contact your application
manufacturer for support.
Use the following procedure to remove a font card:
1 If you are using an HP ProCollection font card, turn off the
printer.
Otherwise, press the Online/Offline key to take the printer off
line.
2 Pull out the card gently.
3 Depending on the type of card you are removing, either turn
on the printer again or put it back on line.
2 Insert the font card.
You can use either slot,
but the card must be
inserted with the QMS
label side facing up. You
should feel the card snap
into place.