Filter
Top Products
Macintosh
a Open the Installer application.
If you’re using the SYSTEMDL.PS file (see the
table in the previous section), double-click the
PRINTSYSTEM.INSTALLER file icon.
If you’re using the SYSTEM.DL file (see the table
in the previous section), double-click the SYSTEM-
LOADER.1 icon.
b In the dialog box that appears, change the Install
Location to the folder you created in step 2. Use the drop-
down list box to select Select Folder, in the Select the
Installation Folder dialog box select the appropriate disk
and folder, and then click Select.
c Click Install to begin the installation.
d When prompted, insert disk 2 of the system software.
The installation takes approximately 1.5 minutes. The
Installer places the appropriate system software file
(either SYSTEMDL.PS or SYSTEMLOADER) in the
folder you selected in step b.
e When the installation is finished, you’re prompted to click
Quit to exit the Installer program.
PC
a At the DOS C:\
DIRECTORY
prompt, type
x
:pkunzip
x
:system↵ where
DIRECTORY
is the name of the new
directory you created in step 2, and
x
is the name of the
disk drive in which you inserted Disk 1.
b Follow the prompts. They instruct you to insert the
system software disks in the following order:
Last disk (system software disk 2)
Disk 1 (system software disk 1)
Disk 2 (system software disk 2)