Filter
Top Products
Allows you to enable or disable print spooling.
Allows you to specify which jobs are printed first, according to the
interface through which they are received, when jobs are received
simultaneously. In other words, you can give jobs received via the
LocalTalk interface priority over jobs received via the parallel and
serial interfaces.
Default Enabled
Notes The printer must be restarted for changes to the Mode menu to
take effect. You can either let the printer restart automatically
after you save the change and exit from the configuration
menu, or you can wait for the change to take effect the next
time you manually turn on the printer.
Menu Administration/Communications/LocalTalk/Connection
Choices Conventional—Allow one LocalTalk connection and accept
only one print job at a time. If two users send print jobs to
the printer, the workstation belonging to the first user is
unavailable until the first job has been printed, and the
workstation belonging to the second user is unavailable
until both jobs have been printed.
Spool—Allow multiple LocalTalk connections and accept
(spools) more than one print job at a time. Workstations are
available while jobs are printing.
Both—Allow both single and multiple LocalTalk connections.
Default Conventional
Notes The printer must be restarted for changes to the Connection
menu to take effect. You can either let the printer restart
automatically after you save the change and exit from the
configuration menu, or you can wait for the change to take
effect the next time you manually turn on the printer.
Menu Administration/Communications/LocalTalk/Def Job Prio
Choices 001-100 (highest-lowest priority)
Default 001 (highest priority)