Filter
Top Products
It's very important to protect the printer controller board and other
printer circuit boards from electrostatic damage.
If an anti-static wrist strap is provided in your printer option kit,
attach one end of it to your wrist and the other end to any convenient
electrical ground. The bare metal chassis of equipment, such as on
the back of a computer, is suitable if it is plugged in but turned off.
Never attach the wrist strap to any piece of equipment with an electri-
cal current present. Turn off all power switches first. Plastic, rubber,
wood, painted metal surfaces, and telephones are not acceptable
grounding points. The printer isn't an acceptable grounding point
either because it must be unplugged before you perform this task.
If you don't have an anti-static wrist strap, discharge your body's
static electric charge by touching a grounded surface before you han-
dle any printer boards or components and before removing the con-
troller board cover. If you must walk around before completing your
task, discharge your body’s static electric charge again before touch-
ing the printer controller board.
Incidental and consequential damages caused by not discharging
electrostatic buildup can affect your printer warranty.