Filter
Top Products
Sets the minimum number of kilobytes of system memory allocated to
the AppleTalk interface.
Sets the binary communications protocol (BCP) for communicating
over a LocalTalk interface to a PostScript printer. See chapter 5,
“Additional Technical Information,” for a full discussion of PS Protocol.
Menu Administration/Communications/AppleTalk/Min K Spool
Choices 00000-99999
Default 00015
Notes This value must be less than the K Mem for Spool value.
A 00000 value does not turn off the spooling buffer for the
parallel interface. If the value is set to 00000, the printer
calculates the Min K Spool automatically at initialization.
The printer must be restarted for changes to the Min K Spool
menu to take effect. You can either let the printer restart
automatically after you save the change and exit from the
configuration menu, or you can wait for the change to take
effect the next time you manually turn on the printer.
Menu Administration/Communications/LocalTalk/PS Protocol