Filter
Top Products
System software is contained on 8 disks—4 PC and 4 Macintosh. The
disks you use depend on whether your printer is functioning or not,
the current firmware version, and how you plan to download the sys-
tem software to the printer.
Once you have identified the appropriate print system software disk
set (using the table in the previous section), you must install the soft-
ware on your computer’s hard disk before you can download it to the
printer.
1 Ensure that your computer has enough free hard disk space
for the system software.
2 Create a new folder (Macintosh) or directory (PC) on your
computer.
3 Insert Disk 1 of the appropriate print system software disk
set in your computer’s disk drive.
4 Install the files on your computer’s hard disk.
* To download the system software from a UNIX system, you must first install the system
softwae on a Macintosh or PC and then upload it to the UNIX system.
** The printer’s firmware level is listed on both the start-up and status pages.
Computer* Disk Set to Use Hard Disk
Space Needed
(approx.)
Printer Firmware
Version**
Interfaces for
Downloading
Functional Non-Functional
Macintosh SYSTEMLOADER 1.75 MB
√√
1.x Serial
SYSTEMDL.PS 3.25 MB
√
2.x All
PC SYSTEM.DL 1.75 MB
√√
1.x Parallel,
serial
SYSTEMDL.PS 3.25 MB
√
2.x All