Filter
Top Products
Adding a Power Supply
148
12. Replace the EMI shield by inserting the tabs on the top of the EMI shield into the slots chassis just below
the front panel. Then push the EMI shield into the chassis and tighten the two mounting screws on the
bottom.
13. Replace the front bezel by aligning it over the front panel and front of the chassis and snapping it to the
bezel retainer clips along the sides of the chassis.
To view the video, click here.
Once the system is re-assembled, be sure there are no errors on the front panel or system console. Be sure the
system is ready for customer use.
Power Supply
Power Switch