Filter
Top Products
rp7400 Enterprise Server System Safety and Regulatory Information
8
Regulatory Information
For your protection, this product has been tested for conformance to various national and international
regulations and standards. The scope of this regulatory testing includes electrical and mechanical safety,
electromagnetic emissions, immunity, acoustics and hazardous materials.
When required, approvals are obtained from third party test agencies. Approval marks appear on the product
label. In addition, various regulatory bodies require some information under the headings listed in this
section.
Electrical Safety
This product has not been evaluated for connection to an “IT” power system (AC distribution system having
no direct connection to earth according to IEC 950).
Locate the AC outlet near the computer! The AC power cords are this product's main AC disconnect devices
and must be easily accessible at all times.
Electrostatic Discharge (ESD) Precautions
When handling any electronic component or assembly (such as, a PCI card or Memory SIMM), you must
observe the following antistatic precautions to prevent damage. An ESD kit (HP P/N A3024-80004) is
available (or supplied with Memory additions). This kit contains one wrist strap, one conductive sheet, and
one anti-static foam pad.
• Always wear a grounded wrist strap when working around the system, and when handling printed circuit
boards.
• Treat all assemblies, components and interface connections as static-sensitive.
• Avoid working in carpeted areas, and keep body movement to a minimum while removing or installing
boards, to minimize buildup of static charge.
Battery Notice
This product contains a Lithium battery.
This battery is not to be removed or replaced by the user. If the battery needs to be replaced, contact your
Hewlett-Packard authorized service personnel.
CAUTION Lithium batteries may explode if mistreated.
Do not recharge, disassemble, or dispose of in a fire.
Please properly recycle all used batteries.