Filter
Top Products
91
rp7400 Server Unpacking
1. Carefully remove the carton and anti-static bag from the pallet.
2. Remove the front two (2) L-brackets. Retain the 1/2-inch bolts for later use.
NOTE As viewed from the front, one bracket is located on each side at the base of the cabinet near
the front.
3. At the rear of the cabinet:
a. Open the door.
b. Remove the anti-tip foot by removing and retaining the two (2) 1/2-inch bolts.
c. Remove the two (2) L-brackets (revealed by removing the anti-tip foot).
4. Remove the two ramps from the pallet and carefully place them into the slots at the front of the pallet.
Rear
Front
1
1
2
3
1. Shipping L-Bracket
2. Shipping Pallet
Bolts
For Shipping:
L-brackets are
mounted behind
anti-tip foot.
Same bolts
secure both.