Hitachi C9295A#B1H Printer User Manual


 
Media that is heavily textured, embossed, or does not accept ink well
Media that is too lightweight or stretches easily
Cards and envelopes
Avoid envelopes that have a very slick finish, self-stick adhesives, clasps, or windows.
Also avoid cards and envelopes with thick, irregular, or curled edges, or areas that
are wrinkled, torn, or otherwise damaged.
Use tightly constructed envelopes, and make sure the folds are sharply creased.
Load envelopes aligned according to the graphic.
Photo media
•Use the Best mode to print photographs. Note that in this mode, printing takes longer
and more memory is required from your computer.
Remove each sheet as it prints and set it aside to dry. Allowing wet media to stack
up may cause smearing.
Transparencies
Insert transparencies with the rough side down and the adhesive strip pointing
towards the back of the device.
Remove each sheet as it prints and set it aside to dry. Allowing wet media to stack
up may cause smearing.
Custom-sized media
Use only custom-sized media that is supported by the device.
If your application supports custom-sized media, set the media size in the application
before printing the document. If not, set the size in the printer driver. You might need
to reformat existing documents to print them correctly on custom-sized media.
Understand specifications for supported media
Use the Understand supported sizes and Understand supported media types and
weights tables to determine the correct media to use with your device and determine the
features that will work with your media.
Always use the correct media-type setting in the printer driver, and configure the trays for
the correct media type. HP recommends testing any paper before buying it in large
quantities.
Understand supported sizes
Understand supported media types and weights
Select print media 19