Honeywell HC900 Network Card User Manual


 
Register Map for Process and Operation Type Variables
Alternator Group Register Map
78 HC900 Hybrid Controller Communications User Guide Revision 4
9/03
Address
(hex)
Register
(decimal)
Parameter Name Access Notes
Bit 1: Input #1 ON: 0=OFF, 1=ON
Bit 2: Input #2 Enable: 0=NO, 1=YES
Bit 3: Input #2 ON: 0=OFF, 1=ON
Bit 4: Input #3 Enable: 0=NO, 1=YES
Bit 5: Input #3 ON: 0=OFF, 1=ON
Bit 6: Input #4 Enable: 0=NO, 1=YES
Bit 7: Input #4 ON: 0=OFF, 1=ON
Bit 8: Input #5 Enable: 0=NO, 1=YES
Bit 9: Input #5 ON: 0=OFF, 1=ON
Bit 10: Input #6 Enable: 0=NO, 1=YES
Bit 11: Input #6 ON: 0=OFF, 1=ON
Bit 12: Input #7 Enable: 0=NO, 1=YES
Bit 13: Input #7 ON: 0=OFF, 1=ON
Bit 14: Input #8 Enable: 0=NO, 1=YES
Bit 15: Input #8 ON: 0=OFF, 1=ON
6703 26372 Input Status #9-16 R
Bit Packed:
Bit 0: Input #9 Enable: 0=NO, 1=YES
Bit 1: Input #9 ON: 0=OFF, 1=ON
Bit 2: Input #10 Enable: 0=NO, 1=YES
Bit 3: Input #10 ON: 0=OFF, 1=ON
Bit 4: Input #11 Enable: 0=NO, 1=YES
Bit 5: Input #11 ON: 0=OFF, 1=ON
Bit 6: Input #12 Enable: 0=NO, 1=YES
Bit 7: Input #12 ON: 0=OFF, 1=ON
Bit 8: Input #13 Enable: 0=NO, 1=YES
Bit 9: Input #13 ON: 0=OFF, 1=ON
Bit 10: Input #14 Enable: 0=NO, 1=YES
Bit 11: Input #14 ON: 0=OFF, 1=ON
Bit 12: Input #15 Enable: 0=NO, 1=YES
Bit 13: Input #15 ON: 0=OFF, 1=ON
Bit 14: Input #16 Enable: 0=NO, 1=YES
Bit 15: Input #16 ON: 0=OFF, 1=ON
6704 26373 Output Status #1-4 R
Bit Packed:
Bit 0: Output #1 Enable: 0=NO, 1=YES
Bit 1: Output #1 Used: 0=NO, 1=YES
Bit 2: Output #1 ON: 0=OFF, 1=ON
Bit 3: Unused
Bit 4: Output #2 Enable: 0=NO, 1=YES
Bit 5: Output #2 Used: 0=NO, 1=YES
Bit 6: Output #2 ON: 0=OFF, 1=ON
Bit 7: Unused
Bit 8: Output #3 Enable: 0=NO, 1=YES