Filter
Top Products
Register Map for Process and Operation Type Variables
Output Order Sequence Scratch Pad Register Map
Revision 4 HC900 Hybrid Controller Communications User Guide 83
9/03
6.25 Output Order Sequence Scratch Pad Register Map
Summary
Output Order Sequence Scratch Pad registers in the Alternator Parameters are modified by using the output
order sequence scratchpad and the sequence write request.
This section contains addresses for the Output order Sequence Scrarch pad.
Function Code Support:
Reads – Function Code 3
Writes – Function Code 16 (10 hex) for preset of multiple registers (e.g., for floating point )
Writes – Function Code 6 for presetting an integer value
Table 6-32 Output Order Sequence Scratch Pad Group Register Map
Address
(hex)
Register
(decimal)
Parameter Name Access Notes
6A00 27137 Output Order
Sequence #1
R/W
Unsigned 16 integer
Only for Fixed and Direct styles.
(See attention below)
6A01 27138 Output Order
Sequence #2
R/W
Unsigned 16 integer
Only for Fixed and Direct styles.
(See attention below)
6A02 27139 Output Order
Sequence #3
R/W
Unsigned 16 integer
Only for Fixed and Direct styles.
(See attention below)
6A03 27140 Output Order
Sequence #4
R/W
Unsigned 16 integer
Only for Fixed and Direct styles.
(See attention below)
6A04 27141 Output Order
Sequence #5
R/W
Unsigned 16 integer
Only for Fixed and Direct styles.
(See attention below)
6A05 27142 Output Order
Sequence #6
R/W
Unsigned 16 integer
Only for Fixed and Direct styles.
(See attention below)
6A06 27143 Output Order
Sequence #7
R/W
Unsigned 16 integer
Only for Fixed and Direct styles.
(See attention below)
6A07 27144 Output Order
Sequence #8
R/W
Unsigned 16 integer
Only for Fixed and Direct styles.
(See attention below)
6A08 27145 Output Order
Sequence #9
R/W
Unsigned 16 integer
Only for Fixed and Direct styles.
(See attention below)
6A09 27146 Output Order
Sequence #10
R/W
Unsigned 16 integer
Only for Fixed and Direct styles.