Filter
Top Products
Download New Firmware
Downloading Firmware using a Networked PC and a Terminal
84
Downloading Firmware using a Networked PC and a
Terminal
You can download new firmware to your LanProbe using a networked personal
computer (PC) and a dumb terminal. Before upgrading firmware, you must first
establish an IP connection between your networked PC and LanProbe.
The following steps are required to download firmware to LanProbe:
1. “Setup TFTP Server for Downloading” below
2. “Download Firmware to LanProbe” below
Setup TFTP Server for Downloading
Refer to your TFTP application manuals for information on how to setup your
server for downloading a file.
Download Firmware to LanProbe
Once your TFTP server is setup for downloading a file, you can download the new
firmware file to LanProbe.