Filter
Top Products
Local Terminal Configuration
Probe Configuration Using a Local Terminal
15
Probe Configuration Using a Local Terminal
Some initial configuration information must be entered into LanProbe before it
can communicate over the network interface or serial port. This initial
configuration for network communication consists of the following parameters:
IP Address (for each Telemetry and Monitor/Transmit port)
Default Gateway IP Address (if required)
Subnet Mask (if required)
Autodiscovery Echo Interval
LanProbe uses the following configuration parameters to display time and date
information in the user interface only. LanProbe uses a separate internal clock to
time-stamp data collected from the network.
Date
Time
Time Zone
The initial configuration for communication over the serial port consists of the
following parameters:
Serial Port IP Address
Serial Port Subnet Mask (if required)
Serial Port Speed
Serial Port Mode
Modem Control String (if required)