Filter
Top Products
Introduction
LanProbe Overview
9
The LanProbe private MIB uses a four-level access control scheme. An access
level is assigned for each community string to be used with LanProbe. The access
level is an integer value between one and four, with increasing degrees of
authorization granted for higher authorization numbers. Each higher level is
granted the rights of all lower levels in addition to the specific privileges of that
level. Table 1-1 shows specific access privileges by level.
Table 1-1: Private MIB Access Security Privileges
* RMON implies RMON-1 and RMON-2.
Default
Community
Name Level Permissions
public 1 Read access to MIB-II objects.
rmon 2 Read access to MIB-II, RMON* MIB, and
LanProbe MIB objects, excluding the objects
in the accessControl group and in the
captureBuffer Table.
rmon_admin 3 Write access to RMON* MIB and LanProbe
MIB objects, excluding the objects in the
probeAdmin, interface, and accessControl
groups.
Read access to MIB-II, RMON* MIB
(including the captureBuffer Table), and
LanProbe MIB objects, excluding those in the
accessControl group.
Agilent_admin 4 Read and write access to all MIB-II, RMON*
MIB, and LanProbe MIB objects.