Filter
Top Products
Local Terminal Configuration
Using a Local Terminal
17
Figure 2-4: LanProbe’s Main Menu
NOTE
Item 5 in Figure 2-4 is not displayed if the
Allow TFTP firmware downloads
menu item is not enabled. Refer to “Modify/View Security Values” on page 20 for
more information on enabling this menu item.
If item 5 (TFTP Download new firmware) is not displayed, the number used to
access items 6, 7, and 8 will be different.
Figure 2-5: LanProbe’s Rear Panel
Main Menu - Revision
1. Modify/View configuration values ->
2. Modify/View security values ->
3. Modify/View interface values ->
4. Display interface summary
5. TFTP Download new firmware ->
6. XMODEM Download new firmware ->
7. Warm start and Exit
8. Cold start and Exit