IBM 4986B LanProbe Network Card User Manual


 
Cables and Connectors
92
Cables and Connectors
This appendix lists cables for use with the Agilent 4986B Ethernet LanProbe. The
minimum connector pin-out are shown if you wish to use an unlisted cable. Note
that each connector pin-out does not necessarily match the pin-out for the
corresponding Agilent cable, but cables manufactured using at least the minimum
pin-out will function correctly.
This appendix covers the following sections:
“Serial Port Interface Cables” on page 93
“Cable Connector Pin-Outs” on page 94