Filter
Top Products
IBM System Storage DR550 Version 3.0 ------17 March 2006 Page 105
IBM Storage Systems Copyright © 2006 by International Business Machines Corporation
If file system is being created: [rootvg] (take the default)
Volume Group for created file system
Advanced Customization Options:
Do you want the DVD to be bootable [ ] (Press F4 – select Yes)
Install bundle file [ ] (leave blank)
File with list of packages to copy to DVD [ ] (leave blank)
Location of packages to copy to DVD [ ] (leave blank)
Customization script [ ] (leave blank)
User supplied bosinst.data file [ ] (leave blank)
Debug Output? [no] (this is the default)
User supplied image.data file [ ] (leave blank)
4. Make sure a DVD-RAM platter is loaded into the DVD-RAM drive on Engine-1 and press
Enter.
Notes for MKDVD command:
The mkdvd command always calls the mksysb command with the flags to extend /tmp.
Enter the file system or directory in which to store the mksysb image. This can be a file
system you created in the rootvg, in another volume group, or in NFS mounted file systems
with read-write access. If left blank, the mkdvd command creates the file system and
removes it when the command completes.
If you did not enter information in the file system field, you can select to have the mkdvd
command either create these file systems in the rootvg, or in another volume group. If the
default of rootvg is chosen and a mksysb image is being created, the mkdvd command adds
the file systems to the exclude file and calls the mksysb command with the exclude files
option -e.
Do you want the DVD to be bootable? If you select no, you must boot from a product CD at
the same version.release.maintenance level, and then select to install the system backup
from the system backup DVD.
If you intend to use an Install bundle file, enter the full path name to the bundle file. The
mkdvd command copies the file into the DVD file system. You must have the bundle file
already specified in the BUNDLES field, either in the bosinst.data file of the mksysb image
or in a user-specified bosinst.data file. When this option is used to have the bundle file
placed on the DVD, the location in the BUNDLES field of the bosinst.data file must be as
follows: /../usr/sys/inst.data/user_bundles/bundle_file_name Do we need to do this?
Additional packages can be placed on the DVD by entering the name of the file that contains
the packages list in the File with list of packages to copy to DVD field. The format of this file
is one package name per line.
If you are planning to install one or more bundles after the mksysb image is restored, follow
the directions in the previous step to specify the bundle file. You can then use this option to
have packages listed in the bundle available on the DVD. If this option is used, you must
also specify the location of installation images in the next step.
Enter the location of installation images that are to be copied to the DVD file system (if any)
in the Location of packages to copy to DVD field. This field is required if additional packages
are to be placed on the DVD (see the previous step). The location can be a directory or DVD
device.
You can specify the full path name to a customization script in the Customization script field.
If given, the mkcd command copies the script to the DVD file system. You must have the
CUSTOMIZATION_FILE field already set in the bosinst.data file in the mksysb image or use
a user-specified bosinst.data file with the CUSTOMIZATION_FILE field set. The mkcd
command copies this file to the RAM file system. Therefore, the path in the
CUSTOMIZATION_FILE field must be as follows: /../filename