Filter
Top Products
IBM System Storage DR550 Version 3.0 ------17 March 2006 Page 52
IBM Storage Systems Copyright © 2006 by International Business Machines Corporation
Single Node - TX adapter
IP Addresses
Gigabit EN Switch #1
(customer's network)
P5 520
CtrlBCtrlA
DS4100
10/100/1000 (T6)
HMC1
HMC2
System
board
10/100/1000 (T5)
USB0 (T7)
USB1 (T8)
192.168.5.102
192.168.4.101
192.168.1.11
192.168.4.24
192.168.5.26
Pwr GXT135p Graphics
Adapter - Slot 2
2 Port 10/100/1000 Ethernet
TX PCI-X Adapter - Slot 3
2 Gb Fibre channel Adapter -
Slot 4 (DS4100)
2 Gb Fibre Channel Adapter
- Slot 5 (DS4100)
2 Gb Fibre Channel
Adapter - Slot 1 (tape)
The following table shows the IP addresses associated with the server, storage and customer
network. Please note that some addresses may need to be changed while others should not be
changed.
IP Address IP Description Device Configuration Need?
DRS_Engine_1
192.168.1.11 drs_engine AIX To be changed
192.168.4.24 drs_engine_DS40001_ctrlA AIX Do not change
192.168.5.26 drs_engine_DS40001_ctrlB AIX Do not change
192.168.4.101 drs_DS40001_ctrlA DS4100 Do not change
192.168.5.102 drs_DS40001_ctrlB DS4100 Do not change
Preconfigured TCP/IP addresses for 10/100/1000t Ethernet networks
Important: Make sure to use the correct adapter(s) and port(s) on the IBM eServer p5 520 server(s)
when connecting to your network; check the interface(s) during configuration. Do not connect the
IBM System Storage DR550 to your network if you already use the factory IP addresses for any
other device within your network environment.