Filter
Top Products
0033-3081 0033-3087
0033-3081 PMdig::write() on socket failed in sending version to
string
. errno=
number
Explanation: dig disconnected client because of version mismatch.
Error Class: May be a version problem.
User Response: Check with the system administrator to insure the same version of the dig
program is installed on each node, for the respective version of VT or POE.
0033-3082 PMdig::ExtractMessage() Invalid command
hex number
found from
string
client
Explanation: Invalid data is present in the buffer.
Error Class: May be a version problem.
User Response: Check with the system administrator to insure the same version of the dig
program is installed on each node, for the respective version of VT or POE.
0033-3083 VT_trrtn:: select() failed in
string
. Error is
string
Explanation: Invalid data is present in the buffer.
Error Class: System Error as explained in the printed message.
User Response: Gather information about the problem and follow local site procedures for
reporting hardware and software problems.
0033-3084 VT_trrtn:: dig_init() failed because dig is already generating traces.
Explanation: Dig is already running traces for some task so currently not available.
Error Class: Two or more tasks are running on the same node.
User Response: Execute only one job task per node at a time.
0033-3085 VT_trrtn:: dig_init() failed because dig version is incompatible with the
poe-trace version.
Explanation: POE version is different from dig version.
Error Class: Versions are different.
User Response: Rerun dig with proper version
0033-3086 VT_trrtn:: dig_init() Unable to contact dig.
Explanation: Not able to communicate with dig.
Error Class: Dig cannot be located or cannot be run.
User Response: Check that the dig executable can be found and that the system is not
overloaded
0033-3087 VT_trc_capture(),Maximum filesize for intermediate file exceeds the
TTEMPSIZE value. Tracing stopped
Explanation: The intermediate trace file size has exceeded the allowed size (either
explicitly set with a command option or environment variable or implicitly set to the default of
10M).
Error Class: The allowed size of the trace file is smaller than the actual trace file.
User Response: Specify a larger size for the permanent trace file size, reduce the number
of trace records being generated (either by changing the trace level flag or by increasing the
time between AIX statistics samples) or use the wrap around trace buffer.
160 IBM PE for AIX V2R4.0: Messages