Filter
Top Products
0029-2015 0029-2021
0029-2015 Could not open socket for debugger to communicate with poe.
Explanation: The socket() call failed when the debugger tried to set up communications
with POE.
User Response: Debugging can continue except that the information about synchronized
exit will not be passed back to the debugger from the POE job. Please note that the
debugger will most likely not be able to re-attach to this POE job after detaching.
0029-2016 Could not make socket connection to poe.
Explanation: The connect() call failed when the debugger tried to set up communications
with POE. The information about a synchronized exit is not passed back to the debugger
from the POE job. The debugger probably cannot re-attach to this POE job after detaching.
User Response: You can continue debugging with limited function. Please note that the
debugger probably cannot re-attach to this POE job after detaching.
0029-2017 Missing or invalid argument to -a flag. For information on the correct syntax
to use when invoking pdbx, type: pdbx -h
Explanation: The -a flag requires an integer argument specifying the process identifier of
the POE process.
User Response: Specify the POE process id when using the -a flag. For example, specify
pdbx -a 34192.
0029-2018 Program not loaded. Issue 'load' or other context-insensitive command.
Explanation: Your program must be loaded on the partition before the pdbx command is
executed.
User Response: Load your program into the partition. For more information, see the pdbx
load command in the IBM Parallel Environment for AIX: Operation and Use manual.
0029-2019 Cannot specify a context for a context-insensitive command.
Explanation: The command that was entered defines a context-insensitive action for a
context-sensitive command. Context insensitive commands cannot be issued in conjunction
with context-sensitive commands.
User Response: Re-specify your command string without the context-sensitive prefix.
0029-2020 Either the alias name which has a 15 character maximum or the alias string
which has a 79 character maximum is too long.
Explanation: You have defined an alias that is longer than 15 characters or an alias string
that is longer than 79 characters.
User Response: Re-specify your alias definition within the allowable maximum limits.
0029-2021 Internal error in
string
:
number
- pdbx was unable to resolve the current
context into task numbers.
Explanation: The context-sensitive command that you entered has no current context
defined.
User Response: Change to a different context or create a new group, and then re-enter
the command. If the problem persists, gather information about it and follow local site
procedures for reporting hardware and software problems.
6 IBM PE for AIX V2R4.0: Messages