Filter
Top Products
Do not place or store the CD in direct sunlight.
Do not use benzene, thinners, or other cleaners to clean the CD.
Do not drop or bend the CD.
Loading a CD
To load a CD into the CD-ROM drive:
1. Press the Eject/Load button. The tray slides out of the drive. (Do not manually
force the tray open.)
2. Place the CD in the tray with the label facing up. If you have placed your
computer in a vertical position using an optional floor stand,
3
extend the
retainers closest to the bottom of the tray. This prevents the CD from slipping
out of the tray when the CD-ROM drive is operating.
CD-ROM
Retainers
3. Close the tray by pressing the Eject/Load button, or by gently pushing the tray
forward. When the tray is closed, the indicator light on the front of the drive
will activate to indicate that the drive is in use.
4. To eject the CD, press the Eject/Load button. When the tray slides out,
carefully remove the CD. (If the clips on the tray are extended, retract the clips
before removing the CD.)
3
When placing the computer in a vertical position, it is important to use a floor stand to prevent
damage to the computer from overheating. Refer to Installing Options in Your Personal Computer for
information on purchasing and installing a floor stand.
46 Using Your Personal Computer