Filter
Top Products
POST Message Description
662 A diskette drive configuration error occurred.
Action:
1. Verify that the Configuration/Setup Utility program correctly
reflects the number of diskette drives you have installed. (For
instructions on using the Configuration/Setup Utility program,
refer to “Configuring Your Computer” on page 22.)
2. If you installed or removed a diskette drive, you must save the
new configuration in the Configuration/Setup Utility program.
Refer to the Important text box on page 22 for further
information and instructions on saving the configuration.
If this does not correct the problem, have the computer serviced.
178X A failure occurred during testing of the hard disk drive or a
primary or secondary IDE device.
Action:
1. Run the diagnostic programs. (See “Diagnostic Programs” on
page 96 for information about diagnostic programs provided
with your computer.)
2. If the diagnostic programs detect a failure, replace the
defective hard disk drive or primary or secondary IDE or EIDE
device.
If the problem cannot be isolated and corrected, have the computer
serviced.
1762 A hard disk configuration error occurred.
Action:
1. Verify that the Configuration/Setup Utility program correctly
reflects the number of hard disk drives you have installed.
(For instructions on using the Configuration/Setup Utility
program, refer to “Configuring Your Computer” on page 22.)
2. If you added or removed a hard disk drive, you must save the
new configuration in the Configuration/Setup Utility program.
Refer to the Important text box on page 22 for further
information and instructions on saving the configuration.
If the problem cannot be isolated and corrected, have the computer
serviced.
Chapter 5. Solving Problems 73