Filter
Top Products
When the system asks whether the DOS AUTOEXEC.BAT should load the
SERVER.EXE, select Yes and press Enter.
At this point, SERVER.EXE is automatically invoked and the system console
screen will appear.
18. Load the disk driver.
Enter the appropriate disk driver at the colon prompt. For example, for an
IBM PC server 320 with a RAID controller, you must use the IBMRAID.DSK
driver.
Type
LOAD C:SERVER.312IBMRAID.
19. Type
LOAD INSTALL.NLM and press Enter. You will see a screen like the one in
Figure 82.
Figure 82. NetWare V3.12 Installation - Main Menu
20. Select Disk Options from the Installation Options menu and then press Enter.
21. Select Partition Tables from the available disk options menu. You will see a
screen like the one in Figure 83.
Figure 83. Create Partition
130 NetWare Integration Guide