Filter
Top Products
Figure 89. STARTUP.NCF File
45. Press Esc and select YES to save the STARTUP.NCF file.
46. Press Esc to return to the System Options menu.
47. Select Create AUTOEXEC.NCF File.
A screen like the one in Figure 90 will appear. All the console commands
you have previously entered have been placed in the AUTOEXEC.NCF file.
Figure 90. AUTOEXEC.NCF File
48. Press Esc and select Yes to save the AUTOEXEC.NCF file.
49. Press Esc twice to exit the installation utility.
50. Type
DOWN at the colon prompt.
51. Type
EXIT at the colon prompt to return to DOS and finish the installation.
52. Reboot the server and verify that the server comes up properly.
All of the commands included in the STARTUP.NCF and AUTOEXEC.NCF files
should execute correctly and return you to a colon prompt indicating that the
server is up and running.
134 NetWare Integration Guide