Filter
Top Products
Figure 91. Installation Menu
7. Select NetWare Server Installation and press Enter.
8. Select NetWare 4.1 and press Enter.
9. Select the kind of installation that you want perform. There are two options,
as follows:
•
Simple Installation
If you select this option, the installation program sets the default values.
You must specify only the server name. The installation then proceeds
to copy the boot files to the DOS partition.
•
Custom Installation
If you select this option, the installation program will ask you for values
to complete the installation.
10. Select Custom installation of NetWare 4.1 and press Enter.
11. Specify the server name and press Enter.
12. Enter an internal IPX network number or accept the default and then press
Enter.
Note
The IPX internal network number is a number used to identify the server
from any other server on the network. It must be different than the
network number used in the bind statement which assigns a network
number to the LAN adapter.
13. Specify in which directory the server boot files will be installed or accept the
default. The default is NWSERVER. Press Enter.
The server boot files are transferred from the CD to the DOS partition.
14. Select a locale configuration for the server. This includes a country code,
code page, and a keyboard mapping. Press Enter.
15. Select the filename format and then press Enter.
16. Set up special set commands.
This is optional and it is used only if you need specific parameters for your
LAN adapter(s). Most will operate with the defaults.
17. Select Yes to assign AUTOEXEC.BAT to load SERVER.EXE.
136 NetWare Integration Guide