Filter
Top Products
Figure 102. Editing STARTUP.NCF File
43. Press F10 and select Yes to save the STARTUP.NCF file.
A screen like the one in Figure 103 will appear. Many of the configuration
parameters you have previously entered have been placed in the
AUTOEXEC.NCF file for you.
Figure 103. Editing AUTOEXEC.NCF File
44. Press F10 and select Yes to save the AUTOEXEC.BAT file.
The files are transferred from the CD to hard disk. You will see a screen
similar to Figure 104 on page 143 which gives you progress of the
installation.
142 NetWare Integration Guide