Filter
Top Products
SmartConnect User’s Guide
100
Chapter 8: Virtual Switch Groups BMD00082, February 2009
Virtual Switch Groups ACL QoS
Use this window to assign Access Control Lists (ACLs) or ACL Sets (group of ACLs) to a
VSGs.
Assigning ACLs has the following prerequisites:
A valid VSG must be configured (see “Virtual Switch Groups Membership” on page 97).
A valid ACL or ACL set must be configured (“ACL Configuration Table” on page 106
and “Access Control List Sets” on page 111).
Once prerequisites are met, an ACL or ACL Set can be applied to different port group combi-
nations within a VSG, as follows:
All Internal Ports
All External Ports
All ports in the Group
To add an ACL or ACL Set:
1. Select the VSG from the ACL Config drop-down list.
2. Choose a port option in the Option drop-down list.
3. Click Edit ACLs to add an ACL to the VSG, or click Edit ACL Sets to add an ACL Set
to the VSG.
The ACLs Applied or ACL Sets Applied window will appear.
4. Add or remove ACLs or ACL sets for the specified VSG ports.
To add an ACL or ACL Set, select an item in the Available column and click Add.
To remove an ACL or ACL Set, select an item in the Group column and click Remove.
5. Click Apply at the bottom of the window to make the changes active, and Save to retain
them beyond reboot and power cycles.