Filter
Top Products
SmartConnect User’s Guide
106
Chapter 9: Switch Policies BMD00082, February 2009
Access Control Lists
Access Control Lists (ACLs) are used for limiting or permitting network traffic based on a
variety of port, network, and traffic characteristics.
Use the ACL Configuration Table window to search for existing ACLs to view or edit, or to
launch the window for configuring a new ACL.
Once ACLs or ACL sets are defined, see “Virtual Switch Groups ACL QoS” on page 100 for
assigning them to VSGs.
Also see “Access Control List Sets” on page 111 for information on grouping ACLs together
for quicker application.
ACL Configuration Table
Use this screen to search for and select existing ACLs to view or edit, or to launch the window
for configuring a new ACL.
Searching for an Existing ACL
1. To search for existing ACLs, enter optional search parameters:
Set ID
Switch Egress Port
Source MAC address
Destination MAC address
VLAN ID
Protocol type
Source IP address
Destination IP address
TCP/UDP source port
TCP/UDP destination port
Filter action
Statistics
Fields that have a value of “any” are ignored during the search.